Acrylic Primer Sealer Undercoat

DESCRIPTION: Tawi Acrylic Primer Sealer Undercoat is a premium quality water-based one step pre-coat formulated with special acrylic polymer for good adhesion on multi-purpose substrates. It is used as a multi-substrate sealer for both interior and exterior surfaces which include concrete and fiberboard, wooden doors, windows &furniture, plastics such as uPVC, and PVC.

COLOUR:  White FINISH: Matt

BENEFITS: Alkaline and efflorescence resistance, Non-toxic, does not contain lead, chrome and other heavy metals, Quick-drying time, Good tannin stain resistance, Good coverage and hiding power, Good adhesion, Environmental Friendly

APPLICATION DATA

METHOD: Roller or brush

COVERAGE: 12 – 14 m² / litre (30 µ DFT / coat) depending on surface texture, substrate porosity and method of application

DILUTION: For best performance, dilution is not recommended

SURFACE PREPARATION

 New or unpainted interior and exterior masonry surfaces: Remove all imperfections and sand down for an even surface, remove dust, contaminants with a damp cloth and allow the surface to dry

Previously painted interior and exterior masonry surfaces: Remove any loose, peeling or flaking paint using scrapper or water jet wash whichever is suitable, Repair any imperfections. Fill cracks with suitable water-resistant putty or filler and sand down to an even surface, remove dust, contaminants with a damp cloth, remove oil or grease by solvent cleaning or mild detergent, allow the surface to dry, if fungus, moss or mould is visible, use Anti-Fungus Solution to treat the affected surface. Leave the solution for at least 2 hours, ensure that the previously painted surface is sound, If the surface has a high gloss or semi-gloss finish, sand to remove the high gloss to enable the new paint to adhere

New or unpainted dressed or raw exterior timber: Remove all imperfections and sand for a smooth surface, Fill nail holes with a suitable, exterior grade water-resistant wood filler, Remove dust and contaminants

Plastic surfaces: Degrease and clean new surfaces to remove oil or other contaminants using a suitable cleaning agent, allow to dry.

DRYING TIME: Surface dry: 30 minutes at 25 ^⁰C | Hard dry: 2 hours at 25 ^⁰C

OVERCOATING TIME: 2 hours under normal conditions

RECOMMENDED PAINTING SYSTEM: 1 coat Primer Sealer Undercoat || 2 coats finish coat or water-based topcoat

GENERAL INFORMATION

PACK SIZES: 1 Litre, 4 Litres, 20 Litres

STORAGE: Store in a tightly sealed container in a cool, dry place.

 PRECAUTION: Avoid direct contact with sensitive skin. Use appropriate personal protective equipment

NOTES:

Consult Tawi Paints Technical Advisory Department for advice

Please refer to our Material Safety Data Sheet (MSDS)

DISCLAIMER: The technical information provided on this data sheet is for your guidance and usage. Such information is based on Kipepeo Industries Ltd experience and research and is believed to be reliable. As we have no control over conditions in which the product is used, stored, or otherwise handled, the above information does not constitute a warranty. Buyers must assume responsibility for the suitability of the product for their purposes. The information may be modified by us from time to time, and without notice, based on our experience and continuous product development.

Details